Using the Internet of Things (IoT) Technology for supervising solar photovoltaic or wind power generation can greatly enhance the performance, monitoring and maintenance of the plant. With advancement of technologies the cost of renewable energy equipment’s is going down globally encouraging large scale solar photovoltaic installations. This massive scale of solar photovoltaic deployment requires sophisticated systems for automation of the plant monitoring remotely using cloud/web based interfaces as majority of them are installed in inaccessible locations and thus unable to be monitored from a dedicated location. The new cost effective methodology based on IoT to remotely monitor a solar photovoltaic and wind plant is greatly reduces the implementation time and cost due to its plug and play system without any control wires. Power Plant Controller (PPC) works as a Communication All in One for cloud as well as end devices. It supports IEC 60870-5-102, IEC 60870-5-103, and IEC 60870-5-104 to integration with National Load Dispatch Center (NLDC). This facilitates preventive maintenance, fault detection, historical analysis of the plant in addition to Real Time Telemetry (RTT).
SenNet Solar is a solution for the monitoring and controlling of power generation plants. In this type of installation, it is essential to monitor and remotely control the status of the devices involved in the process: inverters, meters, PV sensors (wired or wireless), substation, trackers, etc. It is compatible with most of the inverter manufacturers on the market such as Solarmax, SMA, Fronius, Danfos, GreenPower, Ingeteam, Aurora, PowerOne, Refu, Kaco, Riello, Xantrex, Sunways, Sungrow, Siemens, Atersa, etc. as well as with most of the meter manufacturers such as Actaris, Landis & Gyr, Circutor, etc. It has All (Radio Frequency, GPRS/3G/4G, WiFi, Ethernet, RS485/232, etc.) in One communication features to connect with the plant Devices, Plant SCADA and NLDC SCADA. SenNet Solar is a plug and play system for your renewable energy plant and it’s reduces the physical work at your plant and you can monitor anytime from anywhere at your smartphone.
We have the wireless Radio Frequency Solar Radiation Sensor (Pyranometer), Voltage, Current, Temperature, Humidity, CO2, CO, Dust Density sensor to connect with the PV panel for monitoring its status and control the individual PV panels remotely for any malfunctioning. All these sensors are able to integrate with the Inverter Datalogger, SenNet Solar Datalogger, and SenNet PPC solution. We have also the wireless IoT solutions for the PV plant substation monitoring and controlling.
You can monitor your complete renewable energy plant without control cable connection.
We have the solutions for Advanced Metering Infrastructure (AMI) and it has been elaborately described at Smart Cities and Smart Grids.
Our RF mesh network solutions at unlicensed frequency (922MHz-925MHz) supports IEEE802.15.4g/4e PHY/MAC, 6LowPAN, IPv6 and supports multi-hopping operation and frequency hopping with security encryption (AES) and authentication (802.1x). The Bi-directional data transmission supports protocol IEC 62056-21 (DLMS/COSEM protocol).
And GPRS and NB-IoT solutions support The Mobile Broadband Standard, specified by 3GPP.
The Hybrid dual mode communication module supports IEEE802.15.4g/4e and G3-PLC 6LowPAN adaption layer for AMI solutions.
You will be able to monitor and control the power in Real Time from your Smartphone.
We are providing complete turn-key solutions from advisory services, Planning, Design to system installation, commissioning and Commercial operation.
You will be able to monitor and control the power in Real Time from your Smartphone.
We have lunched a Business, Reseller, Consulting Partner Program for limited time. please click the link “Partner Program” to become our Partner.
